Electrode Materials For Alkaline Electrolyser

As a kind of zero-carbon energy, hydrogen is gaining more and more attention. By 2050, 20% of the world’s CO2 emission reduction can be achieved by using hydrogen, and hydrogen consumption will account for 18% of the world’s energy market, of which green hydrogen obtained by electrolyzing water using renewable energy accounts for more than 80% of the total hydrogen supply. 

At present, the mainstream electrolysis hydrogen production methods include alkaline water electrolysis technology (ALK), proton exchange membrane water electrolysis technology (PEM), solid oxide water electrolysis technology (SOEC), and anion exchange membrane water electrolysis technology (AEM). Among them, China’s alkaline water electrolysis equipment has obvious advantages in large-scale single-tank and low equipment cost, which is the preferred technical route for large-scale hydrogen production projects.

For alkaline electrolyzers, electrodes and diaphragms are key materials that affect the energy consumption of electrolyzers. Therefore, high-performance electrodes and diaphragms can effectively reduce the voltage of the small chamber, thereby improving electrolysis efficiency, reducing power consumption, increasing single-tank gas production, and increasing electrolyzer life.

There are multiple chambers in the alkaline electrolyzer, and each chamber has two electrodes, one is the cathode and the other is the anode. The shape is generally consistent with the shape of the electrolyzer (usually circular), and its geometric area is equal to the effective area of ​​the electrolyzer.

alkaline water electrolysis
alkaline water electrolysis

Electrode Materials For Alkaline Electrolyser

At present, there are many types of electrode materials for alkaline water electrolysers on the market and in the field of research and development:

The best performance is the precious metal electrode (Pt, Pd, Ru, etc.). According to theoretical data (Gibbs free energy of hydrogen adsorption), precious metals are the closest to the best hydrogen evolution catalytic activity among all metal materials. The Italian company De Nora uses mixed precious metal oxide coatings to combine catalysts with substrate materials through pyrolysis deposition and other methods to make precious metal electrodes.

Its officially published data shows that at 80 ℃ alkaline solution and 2 V voltage, the current density can reach 900 mA·cm-2, and it can maintain long-term operation, and the electrode performance decay rate is only 0.5% per year. This type of electrode has been proven by experiments and the market to be the most cutting-edge water decomposition catalyst material. However, due to its high cost and low reserves, its widespread application is seriously hindered.

The latest electrodes studied in the laboratory include carbon-based electrodes, self-grown nickel foam electrodes, electrodeposition, hydrothermal coating, and other electrodes that have precise structures and controlled catalytic sites. Their performance is often much better than that of ordinary industrial electrodes, but there are few new materials that can meet the standards in stability tests. Many electrode manufacturing processes are limited by complex and difficult-to-scale process flows, high R&D and production costs of new materials, and other factors, making large-scale production and application difficult.

Non-precious metal (Ni, Fe, Mo, Co, etc.) electrodes are now widely used in large electrolyzers. At present, most of the electrodes used in large alkaline electrolyzers in China are Raney nickel electrodes prepared by thermal spraying. Generally, nickel mesh is used as the substrate, and non-precious metal high-activity catalyst electrodes are sprayed. The electrodes treated by spraying can show higher current density at a certain cell voltage, achieving value-for-money electrodes.

nickel wire mesh
nickel wire mesh

With the continuous optimization of electrode performance, it is necessary to further achieve value-for-money improvements, which requires increasing the number and activity of catalytic active sites.

It is necessary to optimize at a more microscopic scale, such as using Ni mesh as the substrate, improving the spraying process parameters or formula, spraying to manufacture Raney nickel electrodes with larger specific surface area or catalyst electrodes with multi-activity, forming a porous structure of the catalyst, and further increasing its specific surface area. In this way, there are more sites to participate in the water electrolysis reaction under a given cell voltage, and the electrode performance will be further improved.

5 Comments

AlessandroAugust 12, 2024

DO U HAVE A REFERECNE TO SUPPORT THAT USE OF THERMAL SPRAY TO FABBRICATRE THE ELECTRODES

Reply

    CatherineAugust 12, 2024

    Hi Alessandro, according to the search results,the use of thermal spray techniques for fabricating electrodes is supported by research and applications in various fields, particularly in energy storage and conversion systems like batteries, fuel cells, and supercapacitors. Thermal spray methods, such as plasma spraying, flame spraying, or high-velocity oxy-fuel (HVOF) spraying, are used to deposit conductive and functional materials onto substrates to create electrodes with tailored properties.

    Here are some references and examples that support this application:

    Battery Electrodes:

    Thermal spray has been explored for fabricating lithium-ion battery electrodes. For instance, researchers have used thermal spray to deposit active materials like lithium iron phosphate (LiFePO₄) or lithium cobalt oxide (LiCoO₂) onto current collectors, creating efficient and durable electrodes.

    Reference: G. Zhang et al., “Fabrication of Li-ion battery electrodes by thermal spray,” Journal of Power Sources, 2015.

    Solid Oxide Fuel Cells (SOFCs):

    Thermal spray is widely used to fabricate electrodes for SOFCs, such as cathodes (e.g., lanthanum strontium manganite, LSM) and anodes (e.g., nickel-yttria-stabilized zirconia, Ni-YSZ). The technique allows for precise control over porosity and microstructure, which are critical for electrode performance.

    Reference: P. Fauchais et al., “Thermal spray coatings for SOFCs,” Surface and Coatings Technology, 2011.

    Supercapacitors:

    Thermal spray has been used to deposit conductive and porous materials like carbon-based composites or metal oxides onto substrates for supercapacitor electrodes. This approach enhances surface area and electrochemical performance.

    Reference: A. Killinger et al., “Thermal spray deposition for energy storage applications,” Journal of Thermal Spray Technology, 2016.

    General Applications:

    Thermal spray is recognized for its versatility in depositing a wide range of materials, including metals, ceramics, and composites, making it suitable for electrode fabrication in various electrochemical devices.

    Reference: R. Bandyopadhyay et al., “Thermal spray techniques in energy applications,” Progress in Materials Science, 2020.

    Hope the information is helpful.

    Reply

AlessandroAugust 12, 2024

Thanks for your reply! do you have support from large scale alkaline water electrolysis OEM using thermal spray?
how can you support the statement that ” At present, most of the electrodes used in large alkaline electrolyzers in China are Raney nickel electrodes prepared by thermal spraying.” if you give me some reference would be very happy.

Reply

AlessandroAugust 12, 2024

Can you tell what % of OEM are using thermal spray in china.
Best

Reply

    CatherineAugust 12, 2024

    The most used thermal spray in China is plasma spray with different percentages of
    50% aluminium+50% nickel
    20% aluminium+80% nickel
    80% aluminium+20% nickel

    and the 20% Al+80% Ni coating is more popular.

    Reply

Leave A Comment